Elkron wl31 Nstallation And Programmation Manual Download Page 72

Page: 72 / 112

72/112

WL31/WL31TG

8.53 PARAMETERS - ADVANCED [73]

Menu > Parameters > Parameters - Advanced
Authorization level:

TECHNICIAN

Sub menu

Fast code

Advanced Alarm Count

730

Network time OFF

731

Purpose:
Alarm count

: this shows the number of times an intrusion alarm must be repeated before its repetition is blocked.

The count is reset when the system is reactivated or automatically every 24 hours. Possible adjustments are: 1, 2,
4, 6, 8 or NO (alarm goes on buzzing).

How to do it:

1. Press

to access «Alarm count», then press

again.

2. Select the required number of repetitions with the



and



keys and confirm by using the

keys.

Network time OFF

: determines the time after which, in case of power supply present, the control panel signals

network off (5 min, 1 hour, 2 hours, 4 hours).

How to do it:
3.

Press

to access «Network time OFF», then press

again.

Select the required interval with the



and



keys and confirm by using the OK key.

Summary of Contents for wl31

















































































































Search results

Summary of Contents for wl31

Reviews:

Related manuals for wl31

Brands by name

Popular brands

Elkron wl31, Nstallation And Programmation Manual

Search results

Summary of Contents for wl31

Reviews:

Related manuals for wl31

Brands by name

Popular brands