68/112
WL31/WL31TG
OPTIONS
Specialize
: this enables the configurations of the control panel outputs to answer to the following events:
INTRUSION (authorized/unauthorized)
Damaging (unauthorized/system activated 24/14 hr)
Radio damage (authorized/unauthorized)
Fire (authorized/unauthorized)
Panic (authorized/unauthorized)
Gong (authorized/unauthorized)
Report Siren status (unauthorized / acoustic level 1 / acoustic level 2 / acoustic level 3), siren only
Emergency (authorized/unauthorized);
Silent panic (authorized/unauthorized), only for relay outputs
Technological (authorized/unauthorized), only for relay outputs
Service (not used/impulses/le), only for relay outputs
Telephone Failure (authorized/unauthorized), only for relay outputs
Technical failure (authorized/unauthorized), only for relay outputs
System status (authorized/unauthorized), only for relay outputs
The TECHNOLOGICAL, EMERGENCY, SERVICE, TELEPHONE FAILURE, TECHNICAL FAILURE and
SYSTEM STATUS specializations for the relay outputs are EXCLUSIVE, which means that one single output
can not have
other specializations. Signalled by an “(E)” on the display.
Nominate
: this enables you to associate a description name of maximum length of 10 characters to the output,
thus making its following identification easier.
Warning
: it is advisable to always nominate the outputs. See par.
6.9. ENTERING ALPHANUMERIC CHARACTERS THROUGH THE KEYBOARD, page 44.
Associate / Not associate
: this enables you to allocate the output to the system or to a specific.ector.
8.43 OUTPUTS - EXTERNAL SIREN [621]
Menu > Programming > Programming - Outputs
>
Outputs - External siren
Authorization level:
TECHNICIAN
Purpose:
This enables the configuration of the HP30WL siren. All the system’s sirens must be configured.
How to do it:
1. Press the
OK
and use the
and
keys to choo
se the siren from the siren’s list.
2. Confirm your choice by pressing the
OK
key.
3. Use the keys
and
to choose between «Specialization» and «Nominate», «Vers. SW Device» and
«Copy»; confirm your choice by pressing the
OK
key.
4. Use the
,
and
OK
keys to scroll down the different options and to confirm your choice.
OPTIONS
Specialize
: this enables the configurations of the siren to answer to the following events:
INTRUSION (authorized/unauthorized)
Damaging (unauthorized/system activated 24/24 hr)
Radio damage (authorized/unauthorized)
Fire (unauthorized / authorized)
Panic (authorized/unauthorized)
Gong (authorized/unauthorized)
Status reports (switched off level / sound lev. 1 / sound lev. 2/ sound lev. 3)
Flashing device (authorized/unauthorized): this authorizes/unauthorizes the flashing devices working for
status reports
Nominate
: this enables you to allocate a description name of maximum length of 10 characters, to the siren, thus
making its following identification easier.
Warning
: it is advisable to always nominate the sirens. See par. 6.9.
ENTERING ALPHANUMERIC CHARACTERS THROUGH THE KEYBOARD, page 44.
Software
edition
(VERS. SW DEVICE.): this supplies information on the device software edition.
Copy
: this enables the duplication of the programming carried out on all the system devices of the same type (or
only on some, chosen from a list). This function is very useful to reduce the system installation time, since with one
operation only it is possible to configure many devices.
Associate/not associate
: this enables you to associate the external siren with the system or with a specific sector.
Programming underway
: this signals that parameters are being transferred into the siren.
