49/112
WL31/WL31TG
6.3.3 USER CODE
The USER code enables access to the system after authorization through the MASTER code. It only enables you
to carry out the complete or partial deactivation of the alarm system and to carry out tests to periodically verify its
proper working
The pre-set USER code varies from 000001 to 000016 and it is advisable to replace them with other ones that you
will choose after installation.
6.4 CHOOSING THE LANGUAGE
Before carrying out the next steps, it is advisable to choose the language in which the menu items will be shown on the
display. The pre-set language is Italian, but it is possible to choose one of these languages: Italian, English, French,
Spanish, Portuguese, German, Finnish and Polish. To access the language setting function, input the following on the
keyboard:
MASTER Code
OK
320
OK
Use the keys
and
to roll up and down the list of the different languages. To validate your choice press the
OK
key.
6.5 HOW TO ACCESS THE CASCADING MENU
In order to access the cascading menu, digit an access code and then press
OK
, followed by the “
#
” key.
MASTER
code
OK
#
(this accesses the MASTER menu)
USER code
OK
#
(this accesses the USER menu)
TECHNICIAN code
(after authorization)
OK
#
(this accesses the TECHNICIAN menu)
To enter a sub-menu press the
OK
key; to scroll the different menu items on the same level use the
and
,
keys; to go up by one level in the menu tree press the
ESC
key.
To output from all the menus, press the ESC key many times, until the display shows the «((( ELKRON )))» message.
6.6 HOW TO QUICKLY ACCESS A MENU ITEM
In order to quickly access a menu item when already in the menu input
quick code
OK
.
6.7 HOW TO AUTHORIZE THE TECHNICIAN CODE
In
order to authorize the TECHNICIAN code and thus carry out all the system’s programming, do as follows:
MASTER
code
OK
41
OK
OK
6.8 PROGRAMMING BY COMPUTER
All programming, usually made by the integrated keyboard, can be carried out also by a PC and a dedicated
management software in Window surrounding.
This programming mode is more intuitive and easy to make, and allows to operated even from remote.
The PC connection to the system is possible in two ways:
LOCAL: for this connection, use the optional cards IT RS232 or IT USB
REMOTE: this connection is possible only for the control panel WL31TG, and needs the dedicated ELKRON
modem
CAUTION: if the remote connection is implemented by IMG30 module, the SIM card shall be enabled
for data transmission.
