16
MEDEA Programming Manual
3 -
Programming via PC, tablet or smartphone
3.1
Accessing the control panel
Connect to the control panel (see
paragraph 1.1 Programming via computer
) and open the browser of your
computer, tablet or smartphone. The most common browsers can be used: Chrome, Firefox, Edge, Opera.
IMPORTANT!
Internet Explorer is not compatible.
If you are using a USB connection, type
https://192.168.82.83
in the browser address bar. If you are using
a LAN or WiFi connection, type the IP address assigned automatically by DHCP or entered manually in
the browser address bar proceeded by
https://.
The login page will open after a few seconds.
Figure 1 - Login
Enter the Installer code (default code: 000000) and click on the Login button to access the configuration
pages.
Notes
•
The communication with the control panel is always in secure mode (https).If at the first access to the
control panel you receive the message "the conncetion is not safe", click on the
Advanced
button and
then on
Proceed defining the web site as safe
.
IMPORTANT!
The warning messages may vary according to the browser you are using.
IMPORTANT!
Access is only allowed when the system is not switched on and when the installer is
enabled by the master user.
IMPORTANT!
Only one user is allowed access during configuration.
With DIP 1 SW2 in the ON position, MEDEA CONTROL can be accessed even when the control
unit is switched on and the installer is not enabled by the MASTER user.
