95
How to log on
WARNING:
If the system has partitions configured with the block arming, it is not possible
to log in and the following message will appear: “There is at least one partition with block
arming: check the configuration”.
To access the alarm system via Web Server, follow the instructions below:
1. Connect via computer, tablet or Smartphone to the Internet address provided by the
technician. A VPN network is created and the login screen appears.
2. Insert the access credentials (Username and Password). The credentials are
memorised locally in the Web Server and are the same for all the Web Server users.
ATTENTION!
It is not possible to have more than one access at the same time. If
someone has already logged in, no matter what device was used (Smartphone,
tablet, PC), it will not be possible to access the Web Server until that user logs out
or the current session expires.
3. Push the
LOGIN
button.
4. If the Web Server recognises the validity of the access credentials, the
will appear.
If the access credentials are wrong, the login screen will reappear and an error message
will appear on the credentials inserted.
