Elko EKO07253, User Manual

Page: 10 / 30

ELKO - SmartMove Multiwire Dimmer Push
Checking the type of wiring mode
Using the ELKO Smart app, you can check whether the dimmer is connected with
or without neutral wire.
Follow the steps to check the type of wiring mode:
1. On the Home page, tap All devices > Motion Sensor Dimmer .
2. Tap icon and tap Device information .
You see the type of wiring mode (A) in the app.
Device information
A
NOTE: Virtual ID and MAC address may vary with the device.
Configuring the device
Changing the device icon
Using the ELKO Smart app, you can change the icon of the device.
Follow the steps to change the device icon:
1. On the Home page, tap All devices > Motion Sensor Dimmer .
2. Tap icon and tap .
3. Tap Icon to view the menu.
4. In the slide-up menu, select any one of the following (A):
– Take photo - Allows you to take a photo from the mobile camera
– Select from Icon Library - Allows you to select an icon from the app library
– Select from Album - Allows you to select photo from the mobile gallery
Icon Icon
A
10 DUG_SmartMove MW Dimmer_ELKO-00