12
Changing Light Module Colors
1. On any connected EXM2 input device, press and hold AUX + OSC. All three light
modules will begin flashing approximately 1 time every second.
2. Press either AUX or OSC to cycle between colors. Color choices are Blue, Green, Yellow,
Red, and White.
3. Once the desired color is displayed, wait 10 seconds.
4. When the light modules stop flashing, the color is set.
Wi-Fi Mode Indication
When the CobraMax shroud and lighting assembly has been assembled to a Cobra EXM2
monitor and the monitor Wi-Fi is turned on, the CobraMax light modules will turn blue and
begin flashing in an alternating (Back, Sides, Back, Sides) pattern to signal that Wi-Fi is on.
This light operation will continue until the Cobra EXM2 monitor turns off Wi-Fi. Once Wi-Fi is
turned off, the CobraMax light modules will stop flashing and will return to whatever color
they were previously set to.
Custom Etched Lenses (Side Light Modules)
The Custom Lens option for the CobraMax shroud and lighting assembly provides
customers the ability to display a chosen text, number, or image on their CobraMax
monitor assembly. This custom artwork will be displayed and illuminated on both of the
two Side Light Modules of the CobraMax assembly. Upon ordering custom CobraMax
Lenses and providing artwork meeting the requirements, the customer will be provided all
the parts needed to replace the standard ‘Elk & Heart’ lenses received as standard with
their CobraMax assembly with their chosen design. The Side Lighting Modules of the
CobraMax have been designed to allow customers to easily switch out the lenses in order
to display their created image. To purchase custom CobraMax lenses, contact an Elkhart
Brass representative at (574) 295-8330 and complete the CobraMax Custom Lens Order
Form which can be obtained at www.elkhartbrass.com.
Standard ‘Elk & Heart’ Lens
Custom Etched Lens
