background image

The 

Outdoor Illuminated PIR Timer

(3 wire) is part of the Elkay family of 
switches, timers and detectors 
which save energy and increase 
convenience in and around your 
home, garden or premises.

Rating at 240V ac

•  

All load types 16A

•  

Time Delay: 2 min - 2 hrs

•  

Lux Level setting

•  

Blue Locator ring

•  

Last minute indicator

•  

IP66

Usage

The outdoor PIR timer has been designed 
tocontrol lighting, heating and ventilation.
The unit is switched on by the detection

of moving body heat within a specifi ed

range. When body heat is no longer

detected, the unit will switch off  after 

the adjustable time period has elapsed. 
If moving body heat is detected again 
during the timing period, the timing 
sequence will restart. The unit has a lux 
level adjustment, which measures the 
ambient light levels and prevents 
lighting being switched on when there 

is suffi  cient light in the room.

Your Elkay PIR timer has the added benefi t 

of a manual override facility. This allows 
the lights to be turned on for the set 
period of time when the ambient light 
level is such that the lights would not 
usually come on. In dark conditions the 
manual override disables the PIR 

allowing the lights to be turned off  
indefi nitely or when the override switch 

is re-pressed.

 –

OUTDOOR
ILLUMINATED
PIR TIMER

570A-1

    

3 wire

Instruction Guide 

B

D

H

BROOK DESIGN 
HARDWARE LTD

Summary of Contents for 570A-1

Page 1: ...er the adjustable time period has elapsed If moving body heat is detected again during the timing period the timing sequence will restart The unit has a lux level adjustment which measures the ambient light levels and prevents lighting being switched on when there is sufficient light in the room Your Elkay PIR timer has the added benefit of a manual override facility This allows the lights to be tu...

Page 2: ...mm deep British Standard accessory plate Please ensure that the top and bottom lugs are removed if fitted from metal wall boxes prior to fitting Ensure that there is adequate space for wiring LIVE IN NEUTRAL LIVE OUT 2 INSTRUCTION GUIDE OUTDOOR ILLUMINATED PIR TIMER 3 WIRE Side view Plan view 100o approx 60o approx 5 7m 4 6m 5 7m 3 4m Diagram 3 Time settings Please note The black bar denotes the pos...

Page 3: ...ce mount box and remove the knock out section It is recommend the hole is cut with a 20mm hole saw for cleanest effect If required and to ensure IP66 waterproof rating please use a suitable M20 cable gland use appropriate sealing washers Mount the surface mount box on a secure surface using the mounting pack supplied Place screw cover seals over the mounting screws It is essential that the correct...

Page 4: ...IR is in normal operation the override switch can be used to disable the PIR and the lights turned off indefinitely or until the override switch is pressed This can be done by pressing the PIR lens the red LED will flash rapidly to indicate the PIR has been disabled and can be re enabled simply by pressing the lens again N B The PIR will require approximately 1 minute to initialise Brook House Dunm...

Reviews: