ELK-M1XZW
Z-Wave
TM
Lighting Interface
INSTALLATION
MANUAL
Z-Wave is a trademark of Zensys, Inc.
L525 7/09/07
Printed in USA
IMPORTANT INFORMATION
The ELK-M1XZW incorporates a Z-Wave factory produced transceiver module and currently supports
lighting and thermostat device categories ONLY. The current generation of Z-Wave devices do not broad-
cast or update state changes back to any controller device other than the one that commanded the change.
The results are that the M1 may not always accurately display the true state of the Z-Wave lighting devices.
In addition, a M1 rule 'event' cannot be activated by the state change of a Z-Wave light other than lights
changed by a command from the M1 itself. In other words; The ELK-M1XZW and the M1 Control do not
know if the state of a device has been changed by another controller such as a handheld remote. Likewise,
another controller or a handheld remote will not know if the device state has been changed by the M1 and
M1XZW. This is a Z-Wave issue and it is hoped that Z-Wave will remedy this in the future.