manualshive.com logo in svg

EliteConnect SMC2555W-AG, User Manual, Page: 121 / 214

Share
Download
EliteConnect SMC2555W-AG User Manual Download Page 121

SNMP Commands

6-35

Related Commands

snmp-server host (page 6-35)

snmp-server host 

This command specifies the recipient of an SNMP notification. 
Use the no form to remove the specified host.

Syntax

snmp-server host <host_ip_address | host_name> 

<community-string>

no snmp-server host

• host_ip_address - IP of the host (the targeted recipient). 
• host_name - Name of the host. (Range: 1-20 characters)
• community-string - Password-like community string sent 

with the notification operation. Although you can set this 
string using the snmp-server host command by itself, we 
recommend that you define this string using the 
snmp-server community command prior to using the 
snmp-server host command. (Maximum length: 23 
characters)

Default Setting 

Host Address: None
Community String: public

Command Mode 

Global Configuration

Command Usage 

The snmp-server host command is used in conjunction with 
the snmp-server enable server command to enable SNMP 
notifications. 

Summary of Contents for SMC2555W-AG























































































































































































































Reviews:

No comments