MEMORY CARD INSTALLATION
15
PAGE
A
. Turn power on and insert Memory
Card into Main Memory Card Slot
(Main Memory Card in back slot,
Backup Memory Card in front slot.)
(fig a.) Push it all the way in until card
“snaps” into place and the release
button pops up. The screen should
display the “Welcome Screen” (fig b.)
A
. To view the memory capacity of the system or to view
the software version currently running on the system in
operation an information screen is accessible on all Dial
Code systems for easy reference. Turn power off and insert
Memory Card in Main Memory Slot. Turn power on and the
information screen should display as seen in (fig e.)
B
. If the screen continues to display
the “Insert Memory Card” screen
(fig c.) then Eject memory card by
pressing the corresponding release
button down and reinsert Memory
Card into main slot (fig d.). Otherwise
continue with programming.
MAIN MEMORY CARD
BACKUP MEMORY CARD OR
COMMUNICATOR CARD FOR
RF DEVICES/RS485
Welcome To
Elite Entry Phone
Insert Memory Card
IN MAIN SLOT
MEMORY CAPACITY
SOFTWARE VERSION NUMBER
(fig a.)
(fig b.)
(fig c.)
TOP VIEW OF PROCESSOR
POWER SWITCH
FRONT
BACK
DIAL CODE VF-250
REV. 1.00_
(fig e.)
VIEWING THE SOFTWARE VERSION
(fig d.)
