www.elinz.com.au / [email protected] 1300 881 773 www.elinz.com.au / [email protected] 1300 881 773
1. Connecting by Scanning the QR Code
Step 1: Connect the mobile device to your Wi-Fi, then log in to
YCC365 Plus
.
Click
+
in the upper right corner, select the
Intelligent camera
and
Device adding
by scanning the code
;
Step 2: Tick If you have finished the above steps, click
Connect to the
Network
, then click Connect to the network. Select the Wi-Fi your mobile
device is connected, enter the correct password and click Next to continue;
Step 3: Align the QR code on your mobile device with
the camera lens and keep a distance of 10-20 cm;
Step 4:
Click
I heard the "beep" voice
to connect to the Internet after 2 beeps
from the camera. During the process, you will hear "Please wait for Wi-Fi
connecting "and "Please wait for Internet connecting". When you hear
“
Internet connected, welcome to use cloud camera", the camera is
connected successfully.
2. Connecting by AP Hotspot
Step 1: Connect the mobile device to your Wi-Fi, then log in to YCC365 Plus.
Click + in the upper right corner, select
Intelligent camera
and
Addition of
AP hotspot
;