Page - 1
32 Channel Passive CAT5 VIDEO Transceiver
OPERATION MANUAL
UST132RP Front UST132RP Rear
32 Channel Passive CAT5E Video Transceiver
Hum Bar Rejective Anti-jamming Video BALUN
Video Transceiver Introduction
The UST132RP CAT5E 32 Channel Video Transceiver is passive (non-amplified)
device that allows the transmission of real-time monochrome or color video over
Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any
type are supported.
“Up-the-coax” type P/T/Z signals may be sent over the same wire pair. Used as a
receiver, the UST132RP is fully compatible with qualified OEM cameras that are
equipped with an Elinx twisted-pair output.
The unparalleled interference rejection and low emissions of the Model UST132RP
allow video signals to co-exist in the same wire bundle as telephone, datacom, or
low-voltage power circuits. This allows the use of a shared or existing cable plant. With
built-in transient protection, damaging voltage spike problems are eliminated.
The 32 channel passive CAT5E video transceiver BALUN of the UST132RP has in
metal case with female BNC connector and 8x RJ45 sockets model.
Equipment Specifications
Cable Distance
：
Up to 2000ft Transmitter-Receive UTP Cat 5E or better.
Point to Point transmission of real-time PAL, NTSC or SECAM CVBS video signal.
Transient protection, ESD protection, damaging voltage spike problems is eliminated.
Page - 2
CAT5 Video Transceiver System Configuration Diagram
Technical Specifications
z
Video
Frequency
Response: DC to 6 MHz
z
Common-mode/Differential-mode
Rejection:15KHz to 5 MHz, 55 dB typical.
z
Loop Return Loss: over 15dB
z
Line Impedance: Female BNC 75 ohms, CAT5 line, Terminal 100 ohms.
z
Wire Type: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm).
Category Type Cat 5 or better. Impedance 100±20 ohms.
z
DC Loop Resistance 52ohms per 1,000 ft (18 ohms per 100m).
z
Differential
Capacitance
19pF/ft max (62pF/m max).
z
Power Supply: No external power required
Environmental
Temperature -20°C to +65°C.
Humidity (non-condensing) 0 to 95%.
Transient Immunity
Per ANSI/IEEE 587 C62.41
Mechanical
Dimensions:19” 1U Metal Housing
Material: UST132RP metal case.
