STEALTH WASH
ZOOM
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
The Stealth Wash Zoom is a unique DMX intelligent moving head unit. The Stealth Wash Zoom has
3 operating modes; sound active mode, show mode, or controlled via DMX controller. The Stealth
Wash Zoom has 2 DMX Channel modes; 5 or 16 channels. The unit can be run as a stand alone unit
or in a Master/Slave set up. This unit has been tested and there is no assembly required. Follow the
instructions on the following pages to operate your fixture. To enhance the beams effects you can
use a fog machine.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Stealth Wash Zoom
Supply Voltage:
100V-240V 50/60Hz
LED:
7 x 12W RGBW LED’s
Weight:
10lbs./ 4.5 kgs.
Size:
6.22” (L) x 9.4” (W) x 12.63” (H)
Fuse:
2
Amp
Power Consumption: 85W
Working Position:
Any Safe position
Duty Cycle:
None
DMX Channels:
2 DMX Channel Modes:
5
Channel
Mode
&
16
Channel
Mode
Colors:
RGBW
Warranty:
1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Fuse Replacement: Locate and remove
the unit’s power cord. Once the cord
has been removed, the fuse holder is
located inside the power socket. Insert
a flat-head screw driver into the fuse
holder and gently pry out the holder.
Remove the bad fuse and replace with
a new one. The fuse holder has a built-in
second holder for a spare fuse.
