background image

Electro Swarm

 

SPECIFICATIONS: 

Model:     Electro Swarm

Supply  Voltage:     

90V ~ 240V 60Hz/50Hz

LEDs

   6 x 1W (2 Red, 2 Green, &

    2 

Blue) 

Power Consumption: 

15W

Beam Angle: 

 

90 Degrees

Weight:  

 

 

5.3 lbs./ 2.5kgs

Size:   

 

 

14.5”(L) x 10.6”(H) x  

    10.6”(W) 

Fuse: 

   2 

Amp

Working  Position:  

Any Safe position

Duty Cycle:   

 

None

Colors:  

 

 

Multiple Colored Lenses

Warranty:    

 

1 Year

CAUTION!  Please read and 

understand these instructions 

before installing or operating 

this unit.

Operating Instructions:

The Electro Swarm is a powerful effect for clubs and dj’s. The Electro Swarm creates a dramatic 

cluster of stobing, multi-colored beams. This unit features an internal microphone that allows the 

beams to be triggered by sound. The Electro Swarm is ready to be hung or set on the ground in a 

safe position. When mounting this unit to truss be sure to use a clamp. Plug the unit in to a stan-

dard wall outlet. After plugging the unit in, the fixture will react to the beat of the music via the sound 

active internal microphone. The unit has a sensitivity knob on the rear of the unit that makes more or 

less sensitive to sound. Turning the knob in clockwise direction will make the unit more sensitive to 

sound.  The unit requires sound to activate the movement. 
Master-Slave Operation: This function will allow you to link up to 16 units together and operate. The 

units will be sound activated. In Master-Slave operation one unit will act as the controlling unit and the 

others will react to the controlling unit. Any unit can act as a Master or as a Slave. See set up below.

1.  Using standard XLR microphone cables, daisy chain your units together via the XLR connector  

  on  the rear of the units. Remember the Male XLR connector is the input and the Female XLR con 

  nector is the output. For longer cable runs we suggest a terminator at the last fixture.

2.  The dipswitch settings for Master/Slave mode is as follows. On the Master unit flip dipswitch #1 

  and #2 to the “OFF” position. On the Slave unit set dipswitch #1 and #2 to the “ON” position.  

3.   Use the sensitivity knob on the rear of the master unit to make it more or less sensative to sound.

©Eliminator® Bell, CA.   -   wwwEliminatorLighting.com

Caution! Never open unit when in use. 

Reviews: