12
12. Technical specifications
1) Position Indicator Z58.XXX.024
24 VDC - Version
Power voltage 24 VDC +/- 20 %
Consumption max. 70 mA (without measuring system)
2) Position Indicator Z58.XXX.230
resp.
115
(only incremental possible)
230 VAC or 115 VAC- Versions
+/- 10 % 50 - 60 Hz
Consumption max. 5 VA
3) General specifications:
System accuracy
: +/- 1 Digit
Operating temperature
: 0° C + 50° C
Stock temperature : - 40° C + 70° C
Display window
: 14 mm high LED red, 5 Decades
PC- Interface
: Standard RS-232
SSI – Interface
: Standard SSI, as absolute measuring input
Protection class (front)
: IP43 (installed state)
Protection class (rear)
: IP00
Analog input * (Option)
: 10 Bit A/D – Converter, 0... 10 VDC oder 0... 20 mA
Analog output (Option)
: 12 Bit D/A – Converter, 0 ...10 VDC (Imax = 5 mA)
or 0 (4)... 20 mA Rmax = 200
Ω
2 Relay outputs (Option)
: potential free shutters 24 VDC / max. 1 A
Power down memory:
EEprom
I
nputs:
Max. input current 10 mA PNP (active high), 24 VDC +/- 10 %
Encoder supply:
24 VDC, max. 75 mA load by encoder or measuring system
Housing: Aluminium, black
Housing dimensions:
Panel version (standard) b x h
= 96 x 72 mm (cut out 93 x 67 mm)
Install depth with screw terminals
= 78 mm
Install depth with SUB-D connectors = 115 mm
Built on version (Option A): b x h
= 107 x 76 mm
Install depth:
= 95 mm (160 mm with power-connector)
Mounting holes:
2 x M5 max. 7 mm deep, bore hole distance 60 mm
* in preparation