ELGO Electronic PMIX Series, Operating Manual, Page: 9 / 20

Technical Data
- 9 -
4 Technical Data
4.1 Identification
The type label serves for the identification of the unit. It is located on the housing of the sensor and gives the
exact type designation (

8) with the corresponding part number. Furthermore, the type label contains a
unique, traceable device number. When corresponding with ELGO please always indicate this data.
4.2 Dimensions Sensor
Note: The swivel head „SAKB5F“shown in the drawing above is an accessorial part (see op-
tion M1 and M2 in the type designation

8). With M0 standard versions the scope of deliv-
ery includes always 4 holding plates as mounting parts (see also above).
60 + measuring distance
M
5
/
16
d
ee
p
min.2
measuring distance
swivel head SAKB5F holding plate