Type Designation
- 22 -
10
Type Designation
NOTE
When ordering, please use the here described ordering code (Type Designation). Options
that are not required are filled in with „-„.
10.1
Accessories
Table 5: Accessories
Order designation
Description
MB20-20-10-1-R-XX.X*
Magnetic tape with 2 mm pole pitch, suitable for EMSC2
(recommended for interpolation rates up to 200)
MB20-20-10-1-R-HG-XX.X* High precision magnetic tape with 2 mm pole pitch, suitable for EMSC2
(against surcharge, recommended for interpolation rates > 200)
MB20-50-10-1-R-XX.X*
Magnetic tape with 5 mm pole pitch, suitable for LMSC2
End cap set 10mm
End cap set for fix the magnetic tape
FS-XXXX
Guide rail for magnetic tape (FS-1500 for example corresponds to a rail
length of 1.5 m). The rails are available up to 2.0 m length. For larger meas-
uring distances the guide rails can be mounted end-to-end.
FW2070
Guide carriage for EMSC2/LMSC2
AP1.0
Cover profile for magnetic tapes (aluminium; length: 1 m)
*) Please indicate the desired measuring length in XX.X meters
X MSC 2
01.5
Measuring System:
EMSC = for MB20-20 (pole pitch = 2 mm)
LMSC = for MB20-50 (pole pitch = 5 mm)
Cable Length*:
01.5 = standard length 1.5 m
(others on request, max. 2 m available)
Power Supply / Output Levels:
12
= 5 VDC supply / 1 Vpp output
Version:
000
= standard version
001
= first special version (etc.)
12
-
-
- 000
Sensor Design:
2
= compact sensor head with
integrated evaluation circuit
XX
-
Options*:
D1
= connections via 9-pin D-SUB (ELGO standard assignment)
L
= vertical position (sensor chip and installation)
*) Multiple indications possible
