Elgens LPC-2C M Series, User Manual

Page: 25 / 54

ELGENS CO., LTD. 25 LPC P-cap 2CxM Series User Manual
3.3.2 Chipset Configuration
Primary Graphics Adapter
This allows you to select [Onboard] or [PCI Express] as the boot graphic adapter priority. The
default value is [PCI Express].
Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if the
system supports 64 bit PCI decoding).
VT-d
Use this to enable or disable Intel® VT-d technology (Intel® Virtualization Technology for
Directed I/O).
The default value of this feature is [Disabled].
PCIE1 Link Speed
Select the link speed for PCIE1.
PCIE1 Bandwidth Mode
Select the bandwidth mode for PCIE1.
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when the
system boots up.
IGPU Multi-Moniter
Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics be enabled at all times.
Active LVDS
Use this to enable or disable the LVDS. The default value is [Disabled].
Set the item to [enable]. Then press <F10> to save the setting and restart the system. Now the
default value of Active LVDS is changed to ENABLE (F9 load default is also set to ENABLE)
Change the setting from [Enable] to [Disable], and then press <F10> to save the setting and