background image

Upper heating element

 

 

Set the thermostat knob (C) between 50

 and 250

. By turning the knob to this position. The 

oven light and upper heating element come on. This position is recommend for finishing off the 

cooking of food (in baking trays) which is already inside well-cooked but still soft superficially. 

Upper heating element grill

 

 

Set the thermostat knob (C) between 50

 and 250

. The grill components and upper heating 

element come on.   

Grill

 

 

Important: do not set thermostat knob (C) to over 175

. During grilling, keep the oven door 

closed. Food is cooked in the grill by the downward thermal rays produced by an incandescent 

electric heating element. The high, direct grill temperature immediately browns meat, thus 

stopping juice dispersion and keeping meat more tender. The grill is particularly recommended for 

cooking dishes requiring a high superficial temperature. 

Ventilated Grill

 

 

Important: do not set thermostat knob (C) to over 175

. During grilling, keep the oven door 

closed.

 

All grill components and fan work. In this setting, the central heating elements of the top 

work. This combination of features compulsory in the air in the oven for the entire cycle of 

increased non-direct heating elements heat radiation effect. This will allow the heat to penetrate 

the internal food, and avoid food surface Charred. 

Ventilated the central heating elements

 

 

Important: do not set thermostat knob (C) to over 175

. During grilling, keep the oven door 

closed. the central heating elements of the top are activated as well as the fan. This combination of 

features increases the effectiveness of the thermal radiation of the heating elements through forced 

air circulation of the air throughout the oven. This helps prevents foods from burning on the 

surface, allowing the heat to penetrate into the food.   

Maxigrill

 

 

Important: do not the thermostat knob (C) to over 175

. During grilling, keep the oven door 

closed. Both of the heating elements of the grill are activated. For more intensive grilling,select 

this function. 

Ventilated

   

 

Important: do not the thermostat knob (C) to over 175

. During grilling, keep the oven door 

closed. Both of the heating elements of the grill are activated, as well as the fan. This combination 

of features increases the effectiveness of the thermal radiation of the heating elements through 

forced air circulation of the air throughout the oven. This helps prevents foods from burning on 

the surface, allowing the heat to penetrate into the food.   

 

 

Summary of Contents for BLDF90






















Reviews: