Elettronica Santerno SINUS K, User Manual

Page: 57 / 191

SINUS K
INSTALLATION
INSTRUCTIONS
57/ 191
7.7.6. SINUS K S50
To obtain the through-panel assembly of this inverter size, the bottom mounting plate must be removed. The
figure below shows how to disassemble the mounting plate.
To disassemble the mounting plate, remove the six M8 screws
(the figure shows the three screws on one side of the inverter).
Figure 20: Removing the mounting plate from SINUS K S50
for the through-panel assembly.
The piercing template shown in the figure below (right) is to be made on the mounting panel (see relevant
measures). The figure also shows the side view of the through-panel assembly of the equipment. The air flows
and the front and rear projections are highlighted as well (with relevant measures).
Figure 21: Through-panel assembly and fixing points for SINUS K S50.