ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 56 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 56 of 102
CONTROL DEVICES
Position Description
Fig. 7-9
General power switch:
•
O : the machine is disconnected from the electrical power supply;
•
I : the machine is electrically powered.
Fig. 7-10
Jack-type key switch (ignition key) allowing the operator to select the following
controls:
•
OFF (key not inserted): machine off – procedure for turning the machine off.
When in this position, the key can be removed from the switch;
•
READY (key inserted): the machine is activated with the resonator shutter on ON
(active), blocking the path of the laser.
Fig. 7-10
Red emergency stop push-button.
Fig. 7-11 Control pedal for activation of the laser emission (welding).
Tab. 7-2 – Control and notification devices