elero SunTop/Z M RH Manual Download Page 1

SunTop/Z M RH 

Tubular drive for textile sun protection 

13820FR+IT+ES_0919  

Tubular drive 

SunTop/Z M RH 

Operating and installation 

instructions 

Please keep these operating instructions for 
later use, to be available throughout the life of 
the product! 

The German manual is the original version. 

All other documents represent the language 
translations of the original text. 
All rights in the case of a patent, utility model or 
ornamental design registration are reserved. 

General for instructions 

The content structure is based on the life cycles 
of the electric motor drive (hereinafter referred 
to as "Product"). 
The manufacturer reserves the right to make 

changes to the Specifications stated in these 

Operating Instructions at any time. These may, 

in individual cases, be different from the respec

-

tive product version, however the functional 

information will not undergo significant chang

-

es or become invalid. The current version of 

the Specifications may be requested from the 

manufacturer at any time. No claims may be 
asserted against the manufacturer as a result 
of the preceding sentence. Deviations from text 
or picture statements are possible and depend 
on the technical development, features, and 
accessories of the products. Deviating informa-
tion on special versions will be explained by the 
manufacturer in the sales documentation. Other 

information shall remain unaffected by these 

provisions. 

2.1  Standards and Directives 

During the design process, the basic health 

and safety requirements of the applicable laws, 

Standards and Directives were complied with. 

The safety is confirmed by the declaration of 

conformity (see "Declaration of Conformity"). 
All safety information in these Operating In-
structions refer to the laws and regulations 
currently applicable in Germany. All instructions 
in the Operating Instructions shall be observed 
without limitation and at any time. Beside the 

Table of contents

Operating and installation  

instructions  

1

General for instructions  

1

2.1  Standards and Directives  

1

2.2  Intended use  

2

2.3  Foreseeable misuse  

2

2.4  Warranty and liability  

2

2.5  Customer service of the manufacturer  

2

Safety  

2

3.1  General safety instructions  

2

3.2  Layout of the safety guidelines  

3

Product description  

3

4.1  Scope of supply  

4

4.2  Accessories  

4

Assembly  

4

5.1  Mechanical fastening  

5

5.2  Electrical connection  

5

5.3  Connection example SunTop/Z M RH  

230 V / 50 Hz  

6

5.4  Parallel connection  

6

5.5  Commissioning  

6

5.6  Setting the end positions and the relief  

7

Troubleshooting  

8

Repair  

8

Repair  

8

Manufacturer's address  

8

10 

Disassembly and disposal  

8

11 

Notes on the declaration of conformity  

9

12 

Technical data and dimensions  

10

12.1  SunTop/Z M RH  

10

Summary of Contents for SunTop/Z M RH













Reviews: