Elenco Electronics M-1006K, Assembly And Instruction Manual, Page: 5 / 20

-4-
ASSEMBLY INSTRUCTIONS
Identify and install the following parts as shown. After soldering each part, mark a check in the box provided.
Be sure that solder has not bridged to an adjacent pad.
Figure B Figure A
Stand resistor on end as
shown.
Solder and cut
off the excess leads.
C1 - 100pF (101) Discap
C2 - .1
µ
F (104) Mylar (small yellow)
R22 - 470k
Ω
5% 1/4W Resistor
(yellow-violet-yellow-gold)
(see Figure A)
R21 - 470k
Ω
5% 1/4W Resistor
(yellow-violet-yellow-gold)
(see Figure A)
R25 - 100k
Ω
5% 1/4W Resistor
(brown-black-yellow-gold)
(see Figure A)
R15 - 30k
Ω
1% 1/4W Resistor
(orange-black-black-red-brown)
(see Figure A)
R16 - 200
Ω
(201) Potentiometer
(see Figure B)
R17 - 910
Ω
1% 1/4W Resistor
(white-brown-black-black-brown)
(see Figure A)
R14 - 4.7k
Ω
5% 1/4W Resistor
(yellow-violet-red-gold)
(see Figure A)
R13 - 100
Ω
5% 1/4W Resistor
(brown-black-brown-gold)
(see Figure A)
R19 - 470k
Ω
5% 1/4W Resistor
R18 - 470k
Ω
5% 1/4W Resistor
(yellow-violet-yellow-gold)
(see Figure A)
Mount the potentiometer to the PC board as shown.
R20 - 470k
Ω
5% 1/4W Resistor
(yellow-violet-yellow-gold)
(see Figure A)
C5 - .1
µ
F (104) Mylar
R24 - 220k
Ω
5% 1/4W Resistor
(red-red-yellow-gold)
(see Figure A)
C4 - .1
µ
F (104) Mylar (small yellow)
C3 - .1
µ
F (104) Mylar (small yellow)
R23 - 1M
Ω
5% 1/4W Resistor
(brown-black-green-gold)
(see Figure A)
R6 - 100
Ω
.5% 1/4W Resistor
(brown-black-black-black-green)
(see Figure A)
R5 - 900
Ω
.5% 1/4W Resistor
(white-black-black-black-green)
(see Figure A)
R4 - 9k
Ω
.5% 1/4W Resistor
(white-black-black-brown-green)
(see Figure A)
R3 - 90k
Ω
.5% 1/4W Resistor
(white-black-black-red-green)
(see Figure A)