NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
PAGE 1 OF 7
NO
ITEM
CODE
QTY
A
Headboard
QHB
1
B
Footboard
QFB
1
C
Headboard Leg (L/R)
HBLL/HBRL
2
D
Triangle Support Panel
-9 x 200 x 200
HBSPN
2
BOX OF HEADBOARD & FOOTBOARD
NO
ITEM
CODE
QTY
1
FLAT HEAD
CHIPBOARD SCREW
m4 x 32mm RBW
-
8
2
PAN HEAD
CHIPBOARD SCREW
m3.5 x 16mm BLK
-
8
3
JCBC BOLT
M6 x 35MM BLK
-
4
4
JCBC BOLT
M6 x 50MM BLK
-
2
5
SPRING WASHER
1/4" RBW
-
6
6
FLAT WASHER
1/4" ID x 13mmOD BLK
-
6
7
ALLEN KEY m4 x
110mm BLK
-
1
HARDWARE LIST
NO
ITEM
CODE
QTY
E
Side Rail (L/R)
QKR
2
F
Bed Slat
QST
5
G
F/Board Drawer Frame
QFDWF
1
H
Concealed Panel
QKCPN
5
I
H/board Back Support
QHBSR
1
J
Drawer Suppt. Rail - 1
QRDWSR
1
K
Drawer Suppt. Rail - 2
FDWSR
4
L
Support Leg 1
- 30 x 30 x 518mm
SPL1
5
M
Support Leg 2
- 30 x 30 x 95mm
SPL2
1
N
Support Leg 3
- 30 x 30 x 107mm
SPL3
1
O
H/board Back Support
-lvl 18x45x1560
QHBR
1
- 20 x 30 x 1560mm
NO
ITEM
CODE
QT
Y
8
FLAT HEAD
CHIPBOARD SCREW
m4 x 32mm RBW
-
16
9
PAN HEAD
CHIPBOARD SCREW
m3.5 x 16mm BLK
-
27
10
JCBC BOLT
M6 x 35MM BLK
-
15
11
JCBC BOLT
M6 x 50MM BLK
-
6
12
SPRING WASHER
1/4" RBW
-
15
13
FLAT WASHER
1/4" ID x 13mmOD BLK
-
15
14
Z-BRACKET
-
1
15
ALLEN KEY m4 x
110mm BLK
-
1
HARDWARE LIST
NO
ITEM
CODE
QTY
P
Drawer - 1
QKFBDW1/QKF
BDW2/QKFBD
W/QKFBDW4
4
Q
Drawer - 2
QKLDW1/QKR
DW1
2
16
HANDLE
HDS
8
17
T/HEAD M. SCREW
HANDLE M4 x 48MM
BLK
-
4
18
T/HEAD M. SCREW
HANDLE M4 x 50MM
BLK
-
4
BOX OF SIDERAIL
(BOX 1)
(BOX 2)
(BOX 3 & 4)
BOX OF PART & HARDWARE
* DRAWER 1 (P) & 2 (Q)
ARE IDENTICAL AND COULD BE
USED IN COMMON, REGARDLESS
LEFT OR RIGHT.
REMARK!!!
(BOX 2)
(BOX 1)
Assembly instruction for
DESCRIPTION : EMILY QUEEN HEADBOARD
: EMILY QUEEN FOOTBOARD
: EMILY QUEEN RAILS
: QUEEN SLATS & SUPPORT LEGS
ITEM NO :
PEM300QHF/PEM300QRD/PEM300QLD/PEM300QR
Caution : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed
staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person ; this will make
assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non - abrasive floor before assembly. and follow the assembly step to assemble your newly
purchased product correctly and efficiently .
NO
ITEM
CODE
QTY
A1
Headboard Drawer
HBDW1
/HBDW2
2
BOX OF HEADBOARD & FOOTBOARD
(BOX 1)
HBDW1
HBDW2
FBDW1
FBDW3
FBDW2
FBDW4
