A flashing light means
If the light is flashing, it means it is trying to connect. Usually you just need to
give it a minute before it will go solid.
No light means
If a status light is not turning on at all, it means it isn't trying to do anything (for
example the blue Reader light will not turn on until it is told to try and pair with a
Reader). You might need to do an action or change a configuration in the
Console to make it do things.
Pairing a Reader
With the Walker powered on (and other lights either flashing or solid), press the
Power button once. The Walker will enter 'pairing mode' for 10 seconds and the
blue 'Reader' light will begin to flash rapidly.
While the blue ‘Reader’ light on the Walker is flashing, press the centre (blue)
button on the Reader. The Reader will show an ELEMENTICE logo on the screen
as it boots, and then connect to the Walker.
When connected, the blue ‘Reader’ light on the Walker will stop flashing and go
solid to indicate a connection. Meanwhile, the Reader will display useful
information.
If you need to disconnect a Reader
, press the power button on the Walker
again. The Walker will drop the current reader connection and enter pairing
mode again. You can either reconnect with the same Reader by pressing the
centre Reader button again (while the blue 'Reader' light is still flashing quickly)
or pair with a new Reader by pressing that Reader’s centre button instead.
