Element P303BT User Manual Download Page 39 | Manualshive

Page: 39 / 53

background image

Element P303BT User Guide I Page 39 of 53

Message Length

Message length can be set to the maximum value, minimum value. The value is valid between the maximum and the
minimum.
The maximum value and minimum value can be set using Programming command. Please check the programming
command guide for the detail.
Code 39 max length command: 020308. The parameter of this command can be set from min to 48.
Code 39 min length command: 020307. The parameter of this command can be set from 0 to max.
Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.
Programming command: Max: 02030825 ; Min: 02030710.

5.11

Coda Bar

Enable/Disable Coda Bar

Enable Coda Bar (Default)

Disable Coda Bar

Message Length

Message length can be set to the maximum value, minimum value. The data between the maximum and the minimum
is valid.
The maximum value and minimum value can be set using Programming command. Please check the programming
command guide for the detail.
Coda bar max length command: 020206. The parameter of this command can be set from min to 60.
Coda bar min length command: 020205. The parameter of this command can be set from 2 to max.
Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.
Programming command: Max: 02020625 ; Min: 02020510.

Transmit Start/Stop Character

«
...
37
38
39
40
41
...
»

Summary of Contents for P303BT






















































Reviews:

No comments

Related manuals for P303BT

imageFORMULA DR-2050C

Brand: Canon Pages: 22

DR-4010C - imageFORMULA - Document Scanner

Brand: Canon Pages: 58

CANOSCAN LIDE 200

Brand: Canon Pages: 2

Brand: kaarta Pages: 2

Brand: Uniden Pages: 100

Astra 1220 Series

Brand: UMAX Technologies Pages: 20

Brand: LD Pages: 22

Brand: Datalogic Pages: 22

Brand: ION Pages: 1

Brand: Avision Pages: 101

Brand: Microtek Pages: 22

ScanMaker 9800XL

Brand: Microtek Pages: 20

ArtixScan DI 2015c

Brand: Microtek Pages: 10

ArtixScanDI 2020 Plus

Brand: Microtek Pages: 48

Brand: Xerox Pages: 98

Brand: Panini Pages: 87

Brand: Radio Shack Pages: 50

Travel Scanner 150

Brand: Xerox Pages: 194

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands