17
EN
Operating and assembly instructions S-LP
www.elektror.com
9016326 01.20/06
As manufacturer,
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ost
fi
ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements of
the Machinery Directive
(2006/42/EC)
.
Description of the partially completed machine:
Stainless steel low pressure blower S-LP 133/62, S-LP 146/74, S-LP 160/62, S-LP 180/74, S-LP 200/74, S-LP 200/92, S-LP 215/92,
S-LP 225/92, S-LP 250/104, S-LP 315/103
Serial number and year of manufacture can be found on the rating plate and on the accompanying delivery slip.
Description of the essential requirements of Machinery Directive (2006/42/EC), with which the partially completed
machine complies:
Machinery Directive
(2006/42/EC)
: Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.3
Electromagnetic Compatibility Directive
(2014/30/EU)
Eco-design Directive for Energy-related Products
(2009/125/EC)
The partially completed machine described here continues to ful
fi
l the protective regulations of the
Low Voltage Directive
(2014/35/EC)
according to Annex I, No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been veri
fi
ed that the machine, in which the
partially completed machine is to be installed, complies with the provisions of the Machinery Directive
(2006/42/EC)
.
The following harmonised standards were applied:
DIN EN ISO 12100 2011
Safety of machinery - General principles of design -
Risk assessment and risk reduction
DIN EN 60034-1
2011
Rotating electrical machines,
Part 1: Rating and performance
DIN EN 60034-5
2007
Rotating electrical machines,
Part 5: Degrees of protection provided by the integral
design of rotating electrical machines (IP code) - Classi
fi
cation
DIN EN 60204-1
2019
Safety of machinery - Electrical equipment of machines,
Part 1: General requirements
DIN EN 60664-1
2008
Insulation coordination for equipment within low-voltage systems,
Part 1: Principles, requirements and tests
As the manufacturer, Elektror airsystems undertakes to forward the special technical documentation in respect of the partially
completed machine to national authorities at their request. The special technical documentation in respect of this partially
completed machine according to Appendix VII Part B has been created.
The person responsible for the documentation is Mr Kevin Kargar, Tel. +49 711 31973-1179.
Kreher (Managing Director)
Ost
fi
ldern, 17.01.2020
8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B
DECLARATION OF CONFORMITY IN ACC. WITH EVPG (ENERGY CONSUMPTION
RELEVANT PRODUCTS ACT).SECTION 4 PARAGRAPH 1
