Elektror RD 62, Operation And Assembly Instructions

Page: 19 / 48

19
Cr Dr
Br Ar
Gl Hl
Fl El
EN
Operating and assembly instructions RD-ATEX www.elektror.com
016327 02.18/06
Clockwise rotation=Ar to Dr Anti-clockwise rotation=El to Hl
As speci fi ed by law, the user is responsible for safety and
health protection during operation as well as for trouble-free
operation.
According to the ATEX directive for explosion protection as
well as the regulations and standards based on it, require-
ments detailing admissible and inadmissible material com-
binations have been published. Inadmissible material com-
binations may render ineffective any constructive measures
aimed at achieving explosion protection. This may substan-
tially increase the explosion risk entailed in ATEX products.
Spare parts list of non-explosion-protected devices must not
be applied to ATEX appliances and are therefore void.
Recommendation: Use only original spare parts provided by
Elektror as this will enable low-risk replacement.
6 SAFETY RELATED INFORMATION ON
TAKING OUT OF OPERATION AND
REMOVAL
The disconnecting of all electrical connections and all oth-
er electrical engineering work in connection with taking the
blower out of operation must be referred to a quali fi ed electri-
cian.
The blower may only be dismantled after all rotating parts
have come to a standstill and a safeguard has been provided
to prevent restarting.
Dismantling and removal must be performed in accordance
with the guidelines set out in section 2.1, Transportation and
handling.
Dispose of in the appropriate manner.
7 LIABILITY AND EXCLUSION OF
LIABILITY
The owner bears responsibility for the designated use of the
unit.
Elektror shall not be liable in any case of damage resulting
from non-designated use of its units and components.
This also applies, in particular, to special usages and
application conditions, which have not been expressly co-
ordinated with Elektror.
Furthermore, Elektror shall not be liable for damage result-
ing from modi fi cations or conversions to the delivered
equipment or accessories, in particular, if such changes can
impair the explosion protection.
Similarly, Elektror shall assume no liability for maintenance
work and repairs, and the possible consequences thereof,
that have been performed incorrectly, with delay, by techni-
cians not quali fi ed by Elektror, or which have not been
carried out at all.