© ElektroPhysik
QuintSonic 7
23 von 184
4.1.2
Measure mode
– numerical and graphical screen
The screen appears each time a reading has been taken unless you have selected the A-screen
image (see sections 4.1.4 and 7.4.6). The measure mode screen includes a comprehensive and
clear overview of all measuring data.
The total thickness and the individual layers are represented in numerical form (on the right edge
of screen). In addition, readings are shown as a geometric layer model on the left side of screen
with the height of the individual layers being determined by their layer thickness.
The coupling index (on the left) indicates the quality of coupling (see section 6.5.2) achieved during
measurement.
On the upper right, the number of readings stored in the current batch is shown along with the
name of active batch and the name of parameter set relating to this batch (bottom line).
Mains or battery operation
with state of charge
Time
Layer thickness 1
Layer thickness 2
Active
parameter set
Number of readings taken
Antenna icon, flashing if
sensor is connected
Coupling index
Total thickness
Active batch
Structure of
layers,
geometric model
Current property of function key