manualshive.com logo in svg

Elektron Syntakt, User Manual, Page: 85 / 118

Share
Download
Elektron Syntakt User Manual Download Page 85

18. TECHNICAL INFORMATION

85

18. TECHNICAL INFORMATION

ELECTRICAL SPECIFICATIONS

Impedance balanced audio outputs

 

Main outputs level: +15 dBu 

Output impedance: 440 Ω unbalanced

Headphones output

 

Headphones out level: +15 dBu 

Output impedance: 36 Ω

Audio inputs

 

Input level: +15 dBu 

Audio input impedance: 11 kΩ 

Unit power consumption: 12 W typical
Recommended power supply: PSU-3c, 

12 V DC, 2A

HARDWARE

128 × 64 pixel OLED screen 

MIDI In/Out/Thru with DIN Sync out 

2 × 1/4” impedance balanced audio out jacks 

2 × 1/4” audio in jacks 

1 × 1/4” stereo headphone jack 

48 kHz, 24-bit D/A and A/D converters 

Electrically isolated hi-speed USB 2.0 port 

Power inlet: Center positive 5.5 × 2.5 mm barrel jack, 

12 V DC, 2A

PHYSICAL SPECIFICATIONS

Sturdy steel casing 

Dimensions: W 215 × D 176 × H 63 mm 

(8.5” × 6.9” × 2.5”) (including knobs and feet) 

Weight: approximately 1.53 kg (3.37 lbs) 

100 × 100 mm VESA mounting holes. Use M4 screws 

with a max length of 7 mm. 

Maximum recommended ambient operating  

temperature: +35˚C (+96˚F)

Summary of Contents for Syntakt























































































































Reviews:

No comments