14. SETTINGS MENU
78
OVERBRIDGE
enables Overbridge functionality. For more information, please see “7.13 OVERBRIDGE”
USB MIDI
select this option If you wish to send and receive MIDI over USB.
USB AUDIO/MIDI
sets the Syntakt to send and receive audio and MIDI over USB. Select this option
if you want to use the Syntakt together with a class compliant USB audio host. For more information,
please see “7.14 CLASS COMPLIANT DEVICE” on page 26.
14.8.2 LED INTENSITY
Sets the brightness of the key LEDs and screen. Use the
[LEFT]
/
[RIGHT]
keys to change the setting
(LOW, MID, MAX).
14.8.3 REMEMBER SUBPAGE
Will, when selected, remember which PARAMETER page’s subpage you last used and access this page
again the next time you press the same
[PARAMETER]
key. Use the
[YES]
key to toggle this setting.
(ON, OFF).
14.8.4 OS UPGRADE
Use this menu option when you want to upgrade the Syntakt OS. To send the OS file, use our free Elek-
tron Transfer software. Elektron Transfer can be downloaded from the Elektron website.
The device sending the OS file must be connected to the USB port of Syntakt.
Please note that the Syntakt will not appear as an icon on your computer desktop.
1. Download the Syntakt OS file from the Elektron website.
2. Connect the Elektron device to the computer via USB.
3. Open the Transfer application on your computer.
4. On the Transfer CONNECTIONS page, set the MIDI IN and MIDI OUT ports to your Elektron device,
and then press “Connect”.
5. On the Transfer DROP page, drag and drop the OS file. The OS file is then automatically trans-
ferred to the Elektron device and the OS update initiates. A progress bar is visible on device’s
screen when receiving the OS.
6. On your device, press
[YES]
to confirm the OS update.
When the update is done, the Syntakt will reboot.
The Syntakt is always ready to receive an OS upgrade file, so you can use Transfer to drop
the OS file at any time without using this menu option.
14.8.5 DRIVE
You have the possibility to erase all content of the +Drive. Once you have made your choices using the
[LEFT]
or
[RIGHT]
arrow keys and confirmed by pressing
[YES]
, a prompt will appear asking if you want
to execute the formatting procedure. Press
[YES]
to proceed with the formatting.
PSOUNDS
Erases all projects and sounds. Tick/untick this box by pressing the
[LEFT]
or
[RIGHT]
arrow keys.
14.8.6 CALIBRATION
After selecting one of the options, a popup window asking to confirm the calibration will appear. Press
[YES]
to proceed with the calibration. Please note that the calibration routine takes quite a while to
complete.