14. SETTINGS MENU
77
14.6.6 INT TO MAIN
Sets if Syntakt sends internal audio to the MAIN OUT and HEADPHONES OUT or not when used with
Overbridge or as a class compliant audio device.
OFF
No sound is sent to main out.
AUTO
No sound is sent to main out when Overbridge is available and/or streaming audio, if not, the
sound is sent to main out.
ON
sound is always sent to main out.
14.6.7 USB TO MAIN [dB]
Sets the amount of amplification of the sound that is streamed over USB to the Syntakt main out when
used with Overbridge or as a class compliant audio device. (0 dB–+18 dB)
14.6.8 PRE/POST FADER
S
ets if audio over USB should be pre or post the track level setting.
•
Audio from the TRACK OUTPUTS is always without any effects.
•
Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs
in Overbridge.
14.7 GLOBAL FX/MIX
In the GLOBAL FX/MIX menu, you can select several parameter pages whose parameters will (when select-
ed) act on a global level instead of on a pattern level. Then the parameter’s settings on that page will not
only affect the active pattern but will also affect all the other patterns in the project. The parameters text/
value graphics are then inverted. Use the
[LEFT]
/
[RIGHT]
keys to select or deselect the parameter pages
you wish to function on a global level. For more information, please see “13. DELAY, REVERB AND MIXER
PARAMETERS” on page 66 and “12. FX TRACK PARAMETERS” on page 60.
14.8 SYSTEM
The System menu contains USB CONFIG, LED INTENSITY, REMEMBER SUBPAGE, OS UPGRADE, FOR-
MAT +DRIVE, and CALIBRATION options for the Syntakt.
14.8.1 USB CONFIG
Here you find several settings related to Overbridge and USB audio. Selecting one mode disables the
other two modes.