10. AUDIO TRACK PARAMETERS
49
If you have placed a conditional lock on a trig in the sequencer, the trig condition overrides
the Trig Probability setting. For example, if you set PROB to 70% and a FILL trig condition on
a trig, that trig will only (and always) play when the Syntakt is in FILL mode. For more informa-
tion, please see “9.9.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page 42.
10.2.5 FLT.T
Filter Trig controls if the filter envelope will be trigged or not.
10.2.6 LFO.T
LFO Trig controls if the LFO will be trigged or not.
10.2.7 PTIM
Portamento Time sets the time for the portamento.
10.2.8 PORT
Portamento turns the portamento on/off.
For more information, please see “8.6.1 SETUP” on page 29.
10.3 SYN PAGE
The parameters on this page control the (analog and digital) sound synthesis of the selected machine, and
these parameters vary depending on what machine is selected. The parameters for the BD Classic machine
are shown here. For detailed descriptions of the SYN page parameters for the machines, please see “AP-
PENDIX A: MACHINES” on page 87. Use the
DATA ENTRY
knobs to change the settings.
Press
[SYN]
to access this parameter page.
10.4 FLTR PAGE 1
On FILTER page 1, you will find all parameters that control the multimode filter and its associated envelope.
Press
[FLTR]
to access this parameter page.
10.4.1 ATK
Attack Time sets the length of the attack phase of the filter envelope.
10.4.2 DEC
Decay Time sets the length of the decay phase of the filter envelope.
10.4.3 SUS
Sustain Level sets the sustain level of the filter envelope.
10.4.4 REL
Release Time sets the length of the release phase of the filter envelope. The release time can be set to
infinite.