9. THE SEQUENCER
28
9.7.1 PLACING A RETRIG ON AN INDIVIDUAL SEQUENCER STEP
1. In GRID RECORDING mode, press and hold one or several
[TRIG]
keys and then press
[RETRIG]
to access the TRIG REPEAT menu that shows the retrig actions for the chosen sequencer step(s)
on the active track.
2. Use the
LEVEL/DATA
knob to navigate the menu and change the retrig parameter settings. Set
retrig to ON.
3. Release the
[TRIG]
key(s) to exit the TRIG REPEAT menu. The retrig settings are stored together
with the active pattern.
9.8 TRIG NOTE MENU
IN GRID RECORDING mode, Press and hold one or more
[TRIG]
keys to access the TRIG NOTE menu. Use
LEVEL/DATA
to change the settings. Press
LEVEL/DATA
to toggle between
NOTE
,
VEL
, and
LEN
.
NOTE
sets the pitch of the note when trigged. (C0–G10)
VEL
sets the velocity of the sequencer’s note trigs. (0–127)
LEN
Trig Length sets the duration of the notes. When a note has finished playing a NOTE OFF command
is sent. The INF setting equals infinite note length. This parameter only applies if
GATE
is set to ON or
when sending trig length data over MIDI. (0.125–128, INF)
9.9 QUANTIZE MENU
Press
[FUNC]
+
[PUNCH]
to access this menu. Use
LEVEL/DATA
to browse and change the settings.
9.9.1 GLOBAL
Affects all unquantized trigs of all tracks in real time. The higher the parameter value, the more all un-
quantized trigs are corrected towards the grid.
9.9.2 TRACK 1–6
Affects all unquantized trigs of the active track in real time. The higher the parameter value, the more all
unquantized trigs are corrected towards the grid. Press
[T1–6]
to select the track to quantize.
9.9.3 APPLY
Permanently applies the settings made in the
GLOBAL
and
TRACK 1–6
parameters and resets the
GLOBAL
and
TRACK 1–6
settings to 0. Press “YES”
to apply the quantization operation, or “CANCEL
”
to cancel.
9.9.4 LIVE-REC
Applies quantization to the trigs that you record in LIVE RECORDING mode. (ON, OFF).
Press and hold [RECORD], and then quickly press [PLAY] twice to toggle the LIVE RE-
CORDING quantization on and off.
9.10 CLICK MENU
The CLICK menu controls the internal metronome. Press
[FUNC]
+
[GATE]
to open the CLICK menu. Use
LEVEL/DATA
to browse and change the settings.