Elektron Analog Rytm Manual Download

Page: 10 / 98

3. PANEL LAYOUT AND CONNECTORS

3. PANEL LAYOUT AND CONNECTORS

3.1 FRONT PANEL

10 11

The Analog Rytm Front Panel.
1.

MASTER VOLUME

sets the volume for the main outputs and the headphones output.

[FX]

selects the FX track. Secondary function accesses the KIT menu.

[MUTE]

activates MUTE mode. SOUND menu is accessed as a secondary function.

[CHROMATIC]

activates CHROMATIC mode, in which the pads are used to play the current track

Sound chromatically across four octaves. Secondary function accesses the TRACK menu.

[SCENE]

activates SCENE mode, in which a one-push instant change of an array of parameter settings

is possible. Secondary function brings forth the PATTERN menu.

[PERF]

activates PERFORMANCE mode. Secondary function accesses the SONG menu.

[PADS]

are 12 responsive, assignable, velocity and pressure sensitive synthetic rubber pads with after-

touch. They have many possible functions depending on which mode is active and what each pad is set

to do. First of all, they are designed to play the track Sounds. Each drum track has a dedicated pad (see

the complete map on page 21). <PADS> will exhibit a variety of colors.

LEVEL

sets the overall volume level of the active track. Also used for setting parameters and scrolling

through lists.

[TEMPO]

opens the TEMPO menu.

[FUNCTION]

[TEMPO]

makes it possible to tap the tempo.

10.

[YES/SAVE]

key. Used for entering sub-menus, selecting and confirming. If pressed in combination with

2, 3, 4, 5 or 6 above it will instantly save the kit, Sound, track, pattern or song.

11.

[NO/RELOAD]

key. Used for exiting an active menu, backing one step and negating. If pressed in combi-

nation with 2, 3, 4, 5 or 6 above it will instantly reload the kit, Sound, track, pattern or song.

12. The LCD screen.
13. The

[ARROW]

keys. Used for navigation and for setting some parameter values. In menus, they are

called

[UP]

[DOWN]

[LEFT]

and

[RIGHT]

14.

[TRIG SETUP]

key controls the TRIG settings for the active track. Secondary function accesses the

TRIGS menu.

15.

DATA ENTRY

knobs

A-H

. Used for setting parameter values. Press knob when turning to change values

in larger increments.

Summary of Contents for Analog Rytm



































































































Search results

Summary of Contents for Analog Rytm

Reviews:

Related manuals for Analog Rytm

Brands by name

Popular brands

Elektron Analog Rytm, Manual

Search results

Summary of Contents for Analog Rytm

Reviews:

Related manuals for Analog Rytm

Brands by name

Popular brands