13. STARTUP MENU
66
13. STARTUP MENU
To access this menu, hold down the
[FUNC]
key while powering up the Analog Four MKII. From here you
can perform a variety of tasks. To choose the different alternatives, press the corresponding
[TRIG]
key.
13.1 TEST MODE
To enter this mode, press the first
[TRIG]
key. If you have any trouble with your Analog Four MKII and sus-
pect it may be due to a hardware problem, you should perform this self-test. No errors should be reported.
If you get an error, contact Elektron support or the retailer you bought the Analog Four MKII from.
13.2 EMPTY RESET
To perform this operation, press the second
[TRIG]
key. All kits, patterns, Sounds and songs will be erased.
13.3 FACTORY RESET
When performing a factory reset on the Analog Four MKII it will overwrite and re-initialize the active proj-
ect (including all pattern, kit, sound pool and global data). The +Drive project slot 1 will be overwritten and
re-initialized. Sound bank A and B will be overwritten with the factory Sounds. Factory preset patterns, kits,
Sounds and settings will be re-initialized.
If you wish to keep the active project, remember to save it to a +Drive project slot higher than 1 before you
perform a factory reset. To perform a factory reset, press
[TRIG]
key 3.
13.4 OS UPGRADE
Choose this option by pressing the fourth
[TRIG]
key. The Analog Four MKII will enter a waiting stage,
listening for incoming OS data. For the transfer to be possible, the device sending the OS syx-file should
be connected to the MIDI IN port of the Analog Four MKII. USB MIDI transfers are not possible when in the
EARLY START UP menu.
As the Analog Four MKII receives the OS a progress bar will indicate the how much of the OS that has been
received. When upgrading, the
[TRIG]
keys will light up one after another. Please note that this procedure
takes a while. When the transfer is finished the message “PREPARING FLASH” appears. “PREPARING
FLASH” is shortly followed by “UPDATING FLASH”. When this process is finished, the OS is updated.
When performing the sending of the OS syx file, we recommend using our free SysEx
utility C6. It can be downloaded from the Elektron website.
If the Analog Four MKII is receiving the OS upgrade through the MIDI ports, use the Elek-
tron TM-1 USB MIDI interface for up to 10x transfer speeds.
Summary of Contents for Analog Four MKII
Page 1: ...Analog Four MKII Digital mind analog soul User Manual...
Page 9: ...TABLE OF CONTENTS 9...
Page 107: ......
Page 108: ...8062ENG A...
