Elektron Analog Four MKII, User Manual

Page: 65 / 108

12 GLOBAL SETTINGS MENU
65
12.11.2 OS UPGRADE
Select this option when you want to upgrade the Analog Four MKII OS.
Press [YES] to make the Analog Four MKII start listening for incoming OS SysEx data.
For the transfer to be possible, the device sending the OS syx-file should be connected to either the
MIDI IN or USB port of the Analog Four MKII. Cancel the waiting state by pressing [NO] .
When receiving the OS a progress bar will be visible. Once the bar has been filled, the texts “ERASING
FLASH” and “WRITING FLASH” will appear. When successful the machine will automatically reboot.
When performing the sending of the OS syx file, we recommend using our free SysEx
utility C6. It can be downloaded from the Elektron website.
If the Analog Four MKII is receiving the OS upgrade through the MIDI ports, use the Elek-
tron TM-1 USB MIDI interface for up to 10x transfer speeds.
12.11.3 DRIVE
Offers the possibility to erase all content, all projects, and sounds, stored on the +Drive. A prompt will ap-
pear asking if the formatting procedure should be executed. Press [YES] to proceed with the formatting.
12.11.4 CALIBRATION
Starts the calibration routine for the oscillators, pulse widths, and filters. After selecting this option, a
popup window asking to confirm the calibration will appear. Please note that the Analog Four MKII is
factory calibrated. It should not be re-calibrated unless specifically stated by Elektron Support.
Press
[YES]
to proceed with the calibration. Please note the calibration routine takes a while to complete.