Elektron Technology HENSON 8000 User Manual Download Page 29

Page: 29 / 159

Visual field tests

3 .1 .2

Sin g le s t imu lu s

The Single Stimulus Supra-threshold test is ideal for screening the visual field.

The test is fully automated and requires no intervention other than to

instruct

the patient on w hat to do, ensure that they have the correct

refractive

correction

in front of their eye and that they are correctly

positioned

and

comfortable.

The initial test intensity is set to 5dB above the patient's threshold. The

threshold

is derived either from the patient's age or from a measurement

taken at the beginning of the test.

Stimuli that are not seen by the patient are presented a second time at
the same intensity.

If missed on both occasions, the stimulus is marked as a miss and
presented at 8dB above the threshold estimate.

If missed at 8dB it w ill be presented at 12dB above the estimate. A gray
scale indicates the depth of defect (5, 8 or 12dB).

The patient responds to each seen presentation by pressing their

response

button

This test incorporates a number of

false positive catch trails

. These help to

discourage the patient from predicting the next presentation.

The test can be customised the w ith the

addition

of extra stimulus locations.

To g e t mo re h e lp o n a te s t s cre e n ite m click o ve r th e ite m in th e ima g e b e lo w .

Summary of Contents for HENSON 8000
































































































































































Search results

Summary of Contents for HENSON 8000

Reviews:

Related manuals for HENSON 8000

Brands by name

Popular brands

Elektron Technology HENSON 8000, User Manual

Search results

Summary of Contents for HENSON 8000

Reviews:

Related manuals for HENSON 8000

Brands by name

Popular brands