© EA Elektro-Automatik in 2022, this information is subject to change without notice
22
06230900_manual_ps_10000_4u_30kw_en_01
1.9.3
Scope of delivery
1 x Power supply device
2 x Remote sensing plugs
1 x 1.8 m (5.9 ft) USB cable
1 x Set of DC terminal covers
1 x Sense terminal cover
1 x USB stick with documentation and software
1 x AC connector plug (clamp type)
1 x Set for AC cable strain relief
1.9.4
Accessories
For these devices the following accessories are available:
IF-AB
Digital interface modules
Pluggable and retrofittable digital interface modules for RS232, CANopen, Profibus, ProfiNet,
ModBus TCP, EtherCAT or CAN are available. Details about the interface modules and the
programming of the device using those interfaces can be found in separate documentation.
It’s usually available on the USB stick which is included with the device, or as PDF download
on our website.
1.9.5
Options
These options are usually ordered along with the device, as they are permanently built in or preconfigured during the manu
-
facturing process. Post-ordering of cabinet or retrofits upon request.
POWER RACKS
19“-rack
Racks in various configurations up to 42U as parallel systems are available, or mixed with
electronic load devices to create test systems. Further information in our product catalogue,
on our website or upon request
WC
Water cooling
Replaces the standard cooling blocks of the internal power stages by three interconnected,
water cooled blocks with two taps led out for supply. This options helps to avoid heating up
the environment due to exhausted heat caused by a certain power dissipation.
As a side effect, this type of cooling also reduces audible noise.
