21
lighting or other sources. The
ThruScan
’s infrared sensors are a feature that helps to minimise the
audible false alarms by ensuring that an alarm activates only if a person passes through the
archway.
Rarely a false source, such as a person passing and bumping to the archway, may also trigger the
alarm.
CAUTION! The operator must never dismiss a false alarm since there may be the
possibility of a professional terrorist person to create a false alarm by bumping and
thus creating confusion.
3.6 RELAY CONTACT OUTPUTS (RJ11/12)
Relay contacts (for phone connector) are present on
ThruScan
(on the side panel or
on the control unit). This feature provides the control and use of peripheral equipment
such as CCTV, Camera, Turnstiles, Gates, etc...
These contacts; (
(RJ11/12) can be used for
24 VDC/2 Amps.)
1-
NO (Normally Open)
2-
NO (Normally Open)
3-
Common
4-
Common
5-
NC (Normally Closed)
6-
NC (Normally Closed)
*** Contact numbers of the socket are coded as they appear on the picture / WTMD from left to
right.
CAUTION! Relay Output does not function with “Real-Time Video Prosecution Unit”
equipped Walk-Through Metal Detectors.
3.7 SYNCHORNIZATION AND REMOTE CONTROL OUTPUTS (RJ11/12)
This socket (for phone connector)*** is for two or more WTMDs to be used in tandem
and/or for remote control by using the direct cable or a modem via phone line. See
Section 6.13 and Section 7.1
1- Transmitter1
2- Transmitter2
5- Ground/Earth (Norm)
6- RS 232
*** Contact numbers of the socket are coded as they appear on the WTMD from left to right.
