Elekta Neuromag NM21283A, User Manual, Page: 16 / 85

2 Getting started
10 NM21283A-A
The status display area is divided in four regions described here from left
to right:
• The leftmost small icons show the state of the acquisition.
• Area showing current helium level in the dewar.
• Status message area which shows information about ongoing activities.
• Information area showing variable user data like cursor position.
• Scale controls of the graphics display.
2.2 Using online HELP
The
Help
menu contains currently only a button which shows the version
information about the program. No online help is currently available.
2.3 Ending a session
To exit the program, select
Exit
from the
File
menu. This menu is inactive
(gray) during active measurements, so if the menu is unavailable you must
stop the ongoing measurement by pressing the “stop button”. It is recom-
mended that you exit the program after checking the noise levels or tuning
before starting a new acquisition.
Figure 2.1 Main window of the SQUID tuning program
Menu bar
Working point
View channel
Start button
Stop button
State icons
Helium level Status text area Graphics controls
Graphics area
Information area
controls