Solar Powered LED UFO Style Post/Path Lighting
12346 Valley Blvd, El Monte, CA 91732 USA
Phone Number: 1-877-579-3889 Fax Number: (626) 452-9194 www.eesgi.com /www.eleding.com/
Rev: 11162016
EE Systems Group Inc.
2
-1
Installation Instruction
eLEDing
®
/ EE800W-RH series
Thank you for choosing eLEDing!
Introduction and Intellectual Property Rights Statement
This product is designed to provide years of trouble-free services by using environment-friendly Solar-Hybrid-Lithium battery based energy
technologies. Covered under US, European, China and other international patents granted and pending worldwide. All rights reserved.
The performance of this unit is highly related to its mounting location, direction of the solar panel, weather conditions and local environment.
Therefore, to maximize the performance of the unit, user(s)/installer(s) must read this instruction before installation. DIY user(s) must have
knowledge on AC/DC electric/electronic projects and related construction/installation experiences. Otherwise, user(s) should consult with
local experienced electrical & electronics installers or technicians for assistance. Before installation, user(s) should be aware of and comply
with local construction laws, electrical code and life & safety standards/regulations that are applied for this lighting project. During
installation, please follow proper safety guidelines to prevent any possible accidents or injuries.
Only One Step Setup:
This light unit had been fully charged before shipping out. However, turn the switch to OFF and pre-charge the light
under Sunshine condition for 1-2 days before use are recommended. Momentary press on the button/switch once (Fig.1), the light unit will
turn on, indicating the lighting system is activated for illumination. For daytime testing, user can simulate nighttime condition by cover the
solar panel with a large size cardboard. Once the solar panel been covered, the light will immediately turn on; then remove the cardboard the
light will turn off automatically as photo cell function. If the light function as described above, the light is function normal and will provide
all-night-long illumination with SMART lighting profile during nighttime after fully charged.
SMART lighting profile:
Under eLEDing’s software-based Intelligent Power Management (IPM) system, the innovative lighting profile
offers Dusk-to-Dawn lighting capability and auto compensation feature under critical weather conditions, or within different geographic
locations. During nighttime, the light will automatically activated when the ambient light level is lower than 10 LUX. It will keep lighting
with maximum brightness for the first 5 hours for most traffic period timing window, and then automatically convert to energy-saving profile
by diming to 20% of full brightness for the rest of the night. (Fig. 2. 3)
Remote Control for EE825W-RH18 (RGB-RC):
EE825W-RH18 (RGB-RC) comes with a remote control for user(s) to ON-OFF manually
control as standard light and select their favorite illuminating color from 7 different options, and adjust brightness based on their own
preferences. (Fig. 4)
YouTube Video References:
https://youtu.be/mZEvoJE4Yjk
Installation Guidelines
1. Follow above standard setup procedure to activate the lighting system (Fig. 1)
2. Securely mount the unit on the light pole, It’s can be metal or wood (Fig. 5)
3. The light will automatically shut down and charge during daytime sunshine condition (Fig. 6)
4. Recommended mounting height ranges between 7 to 12 feet ( Fig. 7)
5. Diameter of Mounting Adaptor: 2.5" (Fig. 7)
6.
Solar Panel Direction:
The solar panel is built and mounted to face up to the sky and must be set up in a non-obstructed position and
location where it will receive an average of at least 5 hours daily direct sunlight all year round. Clean up the top of solar panel right away
after snowing, and clean it up at least once a year normally is recommended.
7.
Solar Panel Maintenance:
Use a soft wet cloth to periodically (at least once a one year) clean the solar panel to avoid the reduction of
energy output due to accumulated dust. Clean accumulated snow as soon as possible during the snowing season.
e
L
E
D
in
g
(Patented Technology)
Fig.1
Fig.6
Fig.3
Fig.4
Fig.5
