EL 400 DRO
33 |
P a g e
7.7.1. Reference Point
In this function, the absolute Datum is recalled.
Blinking zero next to selected axis will indicate that DRO is now in
HOMING mode. Set the axis close to the marked datum, to within:
6.3mm (0.25”) for an
ES 10
encoder or
2.5mm (0.1”) for a
EU 10
and
EU 5
encoder.
Note: It is highly recommended to mark an indicator on the
encoder so as to use the same reference mark while
finding the datum point.
Press
key and select
‘Home’ mode by pressing
Enter key.
Select the corresponding
axis for referencing.
After pressing axis key
the display updates to
show the exact distance
from the datum.
.
