www.redingtoncounters.com
15
Model 63
Electronic
LCD Hour Meter
Dimensions
2.00 [50.8]
1.86 [47.3]
.16 [4.0]
.02 [0.5]
1.76 [44.7]
1.50 [38.0]
.31 [8.0]
1.10 [27.9]
.87 [22.1]
.48 [12.1]
1.31 [33.4]
.97 [24.7]
Available Icons
Panel Cutout: 1.79” [45.5mm] x 0.89” [22.6mm]
Recommended Panel Thickness: 0.875” [22.2mm]
SERVICE
CHANGE
OIL
OIL FILTER
AIR FILTER
LAMP
MUFFLER
Specifications
Display:
Figures: 8 LCD digits 0.32” [8mm] high
Annunciators Icon: A choice of 7 Icons 0.08” [2mm] high
Reset:
Remote, manual & non-reset. Manual reset enable is available
on some models
Speed:
Low speed: 0-40 counts per second (min. 12.5ms-on, 12.5ms-off
High speed: 0-500 counts per second (min. 1.0 ms-on, 1.0 ms-off
Inputs:
Switch (no voltage)
DC Voltage:
Absolute voltage range:
-0.5 VDC, minimum to
30.0VDC, maximum
VIH:
3.0 VDC, maximum
VIL:
1.0 VDC, minimum
High Voltage AC/DC:
Absolute Maximum voltage: 300VAC/VDC
VIH:
10VDC/20 VAC, max.
VIL:
3VDC/3 VAC, minimum
Power:
Internally powered models: Self powered
(+15yrs lithium battery)
Externally Powered models: 5-28 VDC , externally supplied
Absolute Maximum external power: 30.0 VDC
Output:
Format: Open-Drain MOSFET with Source connected to
Common (see note 3)
Maximum Withstanding voltage: 30VDC, reference to Common
Maximum Load current: 0.1Amp
EEPROM:
(When installed) 40 years
Maximum data writes: 100,000
Battery Life:
15 years +
Mounting:
Panel with clip
Terminations:
Terminal block
Weight:
2 oz. [57g]
Environmental:
Temp. (Storage & Operating):
-4˚F to + 140˚F [-20˚C to +60˚C]
Humidity:
0 to 95% RH, non-condensing
Vibration:
Operating:
10 to 55 Hz, 0.01” [0.25mm]
double amplitude
Non-operating: 10 to 55 Hz, 0.03” [0.75mm]
double amplitude
Shock:
Operating:
10G’s
Non-operating:
30G’s
Dielectric:
1000 VAC 50/60Hz for 1 minute
Accuracy:
100% (provided signal meets stated parameters)
EMC Compliance:
EN61326:1997 with A1: 1998 & A2:2001 for industrial
environments
Enclosure:
NEMA 4/4X, 12, & IP66 compliance (from the front)
when properly mounted using the optional gasket
Approvals:
CE compliant, UL & cUL recognized
Environmental Compliance:
Compliant to the European WEEE & RoHS
Notes
When interfacing the Model 63 with a Solid State Relay or AC Sensor, the leakage current needs to be considered. Contact the factory or see the
application note at www.redingtoncounters.com for further information.
The Absolute Voltage Range and the Absolute Maximum Voltage are the voltages at which operation beyond the specified limits may result in
damage to the unit.
3.
Operates like open-collector NPN. Care should be taken when interfacing to this input since there is no current limiting protection.
1.
2.