Electron Machinedrum SPS-1, User Manual

Page: 24 / 120

THE SOUND SYNTHESIS OF MACHINEDRUM
16
Use the SOUND SELECTION wheel or the [UP] and [DOWN] keys to cycle through the
letters. The [LEFT] and [RIGHT] keys move the cursor backwards and forwards on the
line.
5.
Pressing the [FUNCTION] key gives access to the “high score” selection method, in
which you see all characters at the same time. Keep the [FUNCTION] key held while
navigating using the [LEFT] , [RIGHT] , [UP] and [DOWN] buttons. Release the [FUNC-
TION] key, when you have found the right letter.
6.
When the kit naming procedure is completed, press [ENTER/YES] to save it.
7.
If you want to exit without saving the kit, press [EXIT/NO] .
UNDO KIT
There is a special kit in the first position of the kit list called the “UNDO KIT”.
When you have made unsaved changes to a kit and a new one is loaded, the unsaved old
kit will be stored in the UNDO KIT position. When saving a kit over an occupied position in
the kit list, the overwritten kit will also be saved in the UNDO KIT.
You can load the UNDO KIT to restore your most recent unintentionally lost kit. This can
often be useful in EXTENDED mode, where a pattern change automatically can change
kits. When you have needed to restore your kit using the UNDO kit, don’t forget to save it.
COPY KIT
When in the SAVE KIT or LOAD KIT menus you can copy and paste kits.
When you are in either the SAVE KIT or LOAD KIT menus, select the kit you want to copy,
hold down the
[FUNCTION] key and press the [RECORD] button. A message saying
“COPY KIT” appears.
8.
Use the [UP] and [DOWN] keys to scroll to the slot you want to copy the kit to.