BEFORE PLAYBACK
3
E
F
G
3
3
2
2
1
1
BASS
HOLD
HOLD switch
D
Release the HOLD switch to OFF position before
playback. When not using the unit, set the HOLD
switch to the ON position, Accidentally pressed
button will not function. If buttons are pressed
when
the HOLD switch is set to the ON position. "HOLD"
light on the display.
Turning
on
and
off
D
Turning the power on
Press PLAY/PAUSE. Power is turned on and
playback starts.
Turning off the power
If no new operations are done within 30 seconds
from the end of last operation, the power is turned
off automatically. (Auto power off function) you can
turn off the power before it is automatically turned
off by pressing STOP
Standby mode
D
When an operation finishes, the unit goes into
standby mode until the auto power off function
automatically turns off the power.
To enter standby mode, press PLAY/PAUSE
to start playback, then press STOP
Adjusting the sound
E
Volume
E
Turn the VOLUME control to adjust the volume.
BASS
BOOST
E
Switch on the BASS BO OST for extra bass emp hasized.
the pivot gently.
Pick up the disc, holding its edge, while pressing
To
remove
the
disc
G
3. Close the disc compartment.
2. Place a disc in the center with the label side facing up.
1. Push the OPEN switch
to open
the disc
compartment
Inserting
a
disc
F
