© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
54
All other functions are the same as in standard mode.
To stop using programs on the STIM Card memory and return to using programs stored in the memory of the
Well, from the READY mode press transfer button.
Screen will appear as follows:
WellnessPro PLUS
1. Backup
2. Restore
3. POD transfer
4. Internal memory
STIMCARD
Pressing number 4
will return the unit to the normal mode, meaning the programs will be called
from the internal memory instead of the card.
Note that
option 4
on the screen is now showing text “Internal Memory” instead of “STIM Card”.
If option 4 is selected, a
new message “Internal Memory Completed!” will appear on the screen.
Pressing the CLEAR button will return the unit to READY mode.
Turning LED On/Off
To turn off blue LED stripes on the sides of the unit, from READY mode, press
and HOLD “Select” button for 2
to 3 seconds. The following message will appear:
WellnessPro PLUS
LED Off
This will turn off the blue
LED’s which are present during any AUTO code. Orange LED’s will still glow at the
end of the program, notifying the user that the program is over.
To turn on blue LED stripes on the sides of the unit, from
READY mode, press and HOLD “Select” button for 2
to 3 seconds. The following message will appear on the screen
: “LED On”.
