Electromed WellnessPro + User Manual Download Page 27

Page: 27 / 60

Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc

Operating instructions:

You can use your Well

unit to run the following:



Auto Codes



Single Codes



Custom programs



Custom frequencies

NOTE:

The method of usage is a matter of convenience and personal preference.

NOTE:

To complete any of the following examples your unit must be plugged in, turned on and must be in

READY mode.

NOTE:

For the complete list and single code description please see pages 59-60.

Turning unit ON

Press and hold button for 2-3 seconds

Turning unit OFF

Press and hold button for 2-3 seconds

Note:

To turn off the Well, unit has to be in READY mode.

Screen appearance

During the startup sequence, welcome screen will be shown and audio melody will be heard.

After the startup melody is complete, the Well will go to

standard “READY” mode, screen will be

YELLOW

and will look like this:

FLUX: on

Multi AUTO: on

WellnessPro PLUS

Ready

Summary of Contents for WellnessPro +





























































Search results

Summary of Contents for WellnessPro +

Reviews:

Related manuals for WellnessPro +

Brands by name

Popular brands

Electromed WellnessPro +, User Manual

Search results

Summary of Contents for WellnessPro +

Reviews:

Related manuals for WellnessPro +

Brands by name

Popular brands