Electromed SmartVest Instruction Manual Download Page 15

Page: 15 / 42

SmartVest

SQL Airway Clearance System

www.smartvest.com

SmartVest

Garments

SmartVest Garments

The

SmartVest

delivers full coverage air pulses to the front, back, and sides of the

torso. It is made of a soft, breathable fabric. The

SmartVest

is available in two styles –

the

SmartVest

and the

SmartVest Wrap

• The

SmartVest

has the appearance of a vest. It is constructed of an inner

bladder with a soft, breathable fabric shell and Velcro

®1

-type closures.

• The

SmartVest Wrap

is intended for patients finding it difficult to fit or apply

the standard

SmartVest

. The

SmartVest Wrap

is reversible, allowing the

hose to connect to either the right or left side.

Wearing the SmartVest

or SmartVest Wrap

For a proper fit, the patient should wear a

single layer of clothing underneath the

SmartVest

or the

SmartVest Wrap

Fitting the SmartVest

Steps:

1. Put on the

SmartVest

(without securing any of the closures).

2. Position the bottom of the

SmartVest

at or slightly below the patient’s waist.

3. Secure the front closure. Make sure

the

SmartVest

fits snugly around

the patient’s chest.

4. Adjust the shoulder closures.
5. Attach the hose to the

SmartVest

(refer to the section on Connecting Hose).

Steps 1 & 2

Step 3

Steps 4 & 5

Velcro

is a registered trademark of Velcro Industries B.V.

Summary of Contents for SmartVest











































Search results

Summary of Contents for SmartVest

Reviews:

Related manuals for SmartVest

Brands by name

Popular brands

Electromed SmartVest, Instruction Manual

Search results

Summary of Contents for SmartVest

Reviews:

Related manuals for SmartVest

Brands by name

Popular brands